PLEASE NOTE: If you had an account with the previous forum, it has been ported to the new Genetry website!
You will need to reset the password to access the new forum. Click Log In → Forgot Password → enter your username or forum email address → click Email Reset Link.
INVERTER: 5000W-LF-PSW-SP-12V/220V w/ CHARGING
Is it possible to add RS485 or wifi board to this inverter to monitor inverter?
For instance: output current, charging current, voltage, temperature, etc...
Thanks
INVERTER: 5000W-LF-PSW-SP-12V/220V w/ CHARGING
Is it possible to add RS485 or wifi board to this inverter to monitor inverter?
For instance: output current, charging current, voltage, temperature, etc...
Thanks
Not technically. Back when the CPU board was removable, we could offer a reprogrammed CPU board that had a UART interface...but now the CPU's on the control board. There is no proviso in the firmware for any sort of exterior communications. Also, keep in mind that the PJ "configurations" work by adjusting the inputs to the CPU--in other words, the CPU has no idea what is actually going on.